Scanner Hardware Comparison

Following tables give a quick overview about all laser galvanometer scanners and scan system hardware which is available from HALaser Systems:

	HALdrive X20	HALscan 10.20	HALscan 10N20	HALscan 16.20	HALscan 20.20	HALscan 30.20
Type	XY3-100 to analogue converter	10 mm XY3-100 galvanometer scanner	10 mm NX-02 galvanometer scanner	16 mm XY3-100 galvanometer scanner	20 mm XY3-100 galvanometer scanner	30 mm XY3-100 galvanometer scanner
Interface to Controller Card	XY3-100 via 26-pin IDC or 25-pin D-SUB25 connector	XY3-100 via 25-pin D-SUB25 connector	NX-02 via 25-pin D-SUB25 connector	XY3-100 via 25-pin D-SUB25 connector	XY3-100 via 25-pin D-SUB25 connector	XY3-100 via 25-pin D-SUB25 connector
Description	Converter board to connect a XY3-100 scanner controller with a galvanometer scanner using ±5 V or ±10 V control signals	Fully equipped laser scanning head with housing and 10 mm aperture, can be used with additional lenses		Fully equipped laser scanning head with housing and 16 mm aperture, can be used with additional lenses	Fully equipped laser scanning head with housing and 20 mm aperture, can be used with additional lenses	Fully equipped laser scanning head with housing and 30 mm aperture, can be used with additional lenses
Production State	Active, can be used for new designs	Active, can be used for new designs		Active, can be used for new designs	Active, can be used for new designs	Active, can be used for new designs
Power Supply	±15 V and 0,5 A	±15 V and 3 A		±15 V and 3 A	±15 V and 3 A	±15 V and 3 A
Resolution / Accuracy	20 bits / 1048576 steps (digital)	20 bits / 1048576 steps (digital) 1 μrad (mechanical)		20 bits / 1048576 steps (digital) 1,1 μrad (mechanical)	20 bits / 1048576 steps (digital) 1,15 μrad (mechanical)	20 bits / 1048576 steps (digital) 1,15 μrad (mechanical)
Maximum Laser Power	depends on connected scanhead	90 W		600 W (at specific wavelengths, please refer to manual)	2 kW (at specific wavelengths, please refer to manual)	4 kW (at specific wavelengths, please refer to manual)
Water Cooling	does not apply	not available		optional	optional	optional
Maximum Speed	Nominal: 100000x full working area size per second Actual: depends on connected scanhead	>7 m/sec		>7 m/sec	>5 m/sec	>4 m/sec
Detailled Information	Click here!	Click here!		Click here!	Click here!	Click here!